Decide if you want your venetian blind to fit inside or outside the window of her bathroom. Accurate measurements are especially important if you’re blind to fit inside the recess so that the sides do not rub on the walls when in use intended. If the shutter is too wide, cannot be used because they do not fit properly. When the measurement of its recess, measurements of the width at the top, middle and bottom, and test them. It is not unusual that the width may vary slightly too different heights. If this happens, use the narrowest point in order to determine the width of the shade you require.
The first step is to ensure the retaining clips on window frames. These usually have a hinged section that will need to open before making any adjustments by hand or using a screwdriver as a lever. Keeping the first console to provide, where possible, as will the top corner of the window frame. With a punch, Mark through screw holes in the frame. Then put the glass on one side, and make holes with a drill. Then screw the bracket into position. Do the same with the second bracket in the opposite corner.
Once the brakes have insured its slot nut in place, the ends of the head rail into the brackets. To lock the shutter in position, close the articulated portions of the brackets. If the shade comes with a valance to hide the fasteners, it can be connected to the head rail with Velcro.