How To Install Bathroom Ventilation

Bathroom Ventilation - How To Install An Extractor Fan

Bathrooms get wet, steamy on a regular basis, and therefore is prone to form condensation, what is your decor style grows up and can cause other damage. Can help to open a window, after can circulate with bath or shower, air, but this is not enough, sufficiently aerate the room, you could install a bathroom ventilation system.

A mechanical Extractor is specifically designed to reduce humidity and moist air from the atmosphere. The fan can be mounted on the ceiling, such as a shower, or on an external wall. Can be mounted in a window. It is common for fans of an electric switch that is activated when managed is activated the bathroom light. Some have an extractor fan cutoff switch, which he called the fan after a period that transformed automatically means that there it off, after he has done his job.

To install a wall fan, must have made a hole in an outside wall with a core drill bit and drilling. Can rent, which is a much cheaper alternative to the equipment itself.

You put a fan in a plaster ceiling is a simple process. Carefully decide where to mount your bathroom ceiling fan, there are no cables or pipes nearby, which may be damaged accidentally. The fan must be also of the beams that would get to the installation. Once you've decided to draw your fan turn out better able, leaving a guideline of pencil on the ceiling. Then use a drywall saw Padsaw or access to carefully cut hole. Attach the first phase of the grille Assembly into the hole with screws retaining ring. You can clip and grille with the flexible adapter line and Extractor above.

Is an alternative bathroom ideas to installing a mechanical suction hood, put in a static vent. Use natural openings Lady so that air flow in the room and keep it in circulation. There are various types of openings, some of which, are constantly open to others which can be opened and closed as required.

How To Half-Tile A Bathroom

How To Half-Tile A Bathroom

If your bathroom is fully tiled from floor to ceiling, as long as they are mounted on the walls, you can go get the tile above it, rather than stress and start from scratch. Here, we describe how you have the lower half of the tiles and walls in the upper half of the plaster.

First decide how much you want to have the bathroom wall tiles and with the help of a spirit level to mark a guideline on the wall. You can then fix a wood Nut or rail molding act as a dividing line. Ti holes with a tile cutter pilot, then you must use concrete anchor bolts to a solid wall or standard screws and plugs for an empty wall. Alternatively, you can use to resolve a plastic trim to the walls and behind the new bathroom tiles, border tiles or glue.

Then you must first refurbished rail tile, Nut, then dry cleaning can be sand. Make a mixture of water and 50: 50 PVA and apply this patch just before want to, so that the surface is sticky. Mixer, until some multi finish plaster and a smooth texture with a trowel the plaster on the tiles, with broad sweeping strokes to apply. Try to make it as smooth as possible. Once you have covered the entire area of the wall, and started the patch, something is dry but still wet to the touch, use a damp sponge or plant Mister in conjunction with the trowel, chalk and a perfect finish. Keep in mind, the plaster will require more time, as dry, when it was applied to plasterboard had, and so should wait, completely dry before to decorate it.

Train like you're going to put your new bathroom tile, so that their joints are not up on the joints of old tiles. Typically a number of all tiles at the top will look best with cut tiles to fill the gap at the bottom. So you have to where you start your first measurement line to work, the right size leave gap above the base so that it can end up with a number of full tiles. Lives in a wooden bar, to act as support for the first row of tiles.

Managing the old bathroom tiles, as if it were a wall plastered and apply tile adhesive over them in the usual way. Place your new tile and separate them by spacers, as you were normally. After completing the top line representing the rail nut, you allow the tiles to dry. Enable this takes longer than usual, a couple of days just to be sure. Then remove the wooden bar and the bottom row with tile cutting tiles. Wait once the glue to dry before filling of Malta in the usual way.

Bathroom Lighting Ideas

Ideas for bathroom lighting

The choice of bathroom lighting is essential in creating a relaxed and friendly atmosphere in your bathroom. There are all kinds of lighting fixtures to choose from and the intensity and direction of light is also an important consideration.

Recessed bathroom lighting is commonly used in modern bathrooms. This type of lighting is where many small lights are recessed in the ceiling or walls. They are usually low voltage, but with several of them that it is possible to illuminate the entire room and make a soft light and relaxing, avoiding the harsh glow of a single pendant. This type of lighting can be adjusted so that the light falls on different angles to create your desired look and mood.

The bathroom lights mounted on the rails are also very popular in contemporary bathrooms, light rail to be themselves decorative elements. Many designs of allowing light that moves along the rails, so that you can adjust the lighting accordingly. Generally, these types of lights are low voltage, thus providing a soft light that can work well in a bathroom environment.

In traditional baths, and some modern, low level and bathroom wall lighting is commonly used. This type of lighting allows the emphasis of the light directed to particular areas of a bathroom, as to a sink or vanity unit. The light contrast helps improve the character of a bathroom, while providing good lighting in the functional areas.

If your bathroom lighting does not get much natural light, a mirror can be positioned to reflect light and therefore available to help make the room look lighter and more spacious. A large mirror will have a greater impact than a small in this situation. Choice of soft, pale colors on the walls and the choice of the suite also can help a dark bathroom look lighter and make the most of natural light in the room.

How To Fit Tongue & Groove Paneling To A Bathroom Wall

How to Tongue & Groove panels in a bathroom wall mount

Installation of the tongue and groove panels on the wall is a nice touch to your bathroom can be a whole new look and is a great idea if you give your bathroom a makeover without having to replace you want your most important accessories. An attractive way to wear costumes, just to the base trim level, so you have a contrast between the wood and painted on the wall. You can decorate your panel as you wish, with a varnish stain or paint, which would best fit into your bathroom with character.

To trim fit, you have to build a framework of court, and then fit together in space. Be careful when deciding on the height of your panel to ensure that no drilling in the pipes or cables in the wall. When planning your bathroom design, remember to include access doors, if the adjustment to cover all taps or valves, you can cut the water in an emergency. If you have a lot of accessories have to fit along a wall, a pedestal sink and shower can be difficult to frame and trim around these obstacles, you can only partition that does not prefer anything attached to them.

During construction of the framework is a useful reference to the strips of wood somewhat larger as you would normally use 2 inches x 2 inches. This has a number of advantages. The larger area, you can build a shelf on top, and there is more room for the pipes in the wall to hide behind the disguise. A reference value is approximately 1YD on the floor a good height for the socket. Is required to carry three slats in the wall, which runs horizontally at the top, bottom and in the middle. With a spirit level and pencil to mark their positions on the wall, installed before installing the slats. In a hollow wall, use screws and anchors. In a brick wall, you can use concrete anchors. If there is a vertical tube in shape, cut the strips so that there is a space for the pipes to run between the frames.

The design of the plug-in panels means that the nails or pins to hold together from the point of view are hidden. You will be introduced to 45 degrees by the tongue and groove side of the card is covered. To work efficiently, cut a series of plates to size before starting to fit, and work outward from an inner corner. You should be aware that if the soil tends at all, you can have slightly different lengths of the board as you go along the wall.

To attach the first plate, hold it and check with a spirit level that is completely vertical, then attached directly to each bar at the top, bottom and middle. It's just the board is not hidden fasteners. Tap the nail through the tongue, tongue sliding on the board next. Repeat this process on the wall. If you have outside corners, you need to add some decorative shapes to the shortcut that you can attach with nails or glue costume.

At the top of the molding, cut 3in x 1In slats to length and connects the joints in the corners of a professional-looking interface. This will look better than straight edges abut. Screw or nail the top of the ribbon in place, the setting at 2 inches x 2 inches above the bar. You can then choose the forms at the bottom of the crossbar cute 3 inch x 1 inch in a brooch of gold, or the edge of the track time.

Bathroom Flooring

Bathroom Flooring – How To Lay Hard Tiles

Bathroom flooring with ceramic floor tiles are very popular in the toilet because they are durable and look stylish and elegant. However, they take much work to be installed and a disadvantage is that it can get cold feet. To resolve this problem, you can install a floor heating, or simply use a bath mat structure. Hard tile bathroom ceramic are available in a wide range of sizes, colors and patterns. Most glasses are, but if you need to seal unglazed tiles to prevent them covered with tile adhesive and grout.

For best results, and make your job easier, it is important to plan. Because most bathrooms are not completely square, is not a good idea to start the tile from the edge of the room, as if the walls are level, this imperfection will be visible in the tiles. It's much better to find the center of the bathroom and working toward the edges. The tiles are generally provided on a surface of the subfloor.

When you start laying the bathroom floor, use a notched trowel to apply adhesive to a small area where you plan to ask first. Do not cover too large an area at a time, as you can take "some time to define each tile there is the possibility that the glue begins to dry before they get there. Use pieces of cardboard between the tiles of act as spacers and to ensure a uniform space. When you set a few tiles, maintaining a level on them to ensure they are level. If they are not, it is necessary to adjust the amount of adhesive accordingly. Repeat this as you go to ensure you get the best finish.

Once you do the main bits of tiles, with whole tiles, you must leave overnight for the glue to dry, because you will need to stand on them when you assemble the pieces cut along the edges. Use a cutter to cut the edges straight, and a tile saw for curved edges. Once all the tiles are finished, let the glue dry before grouting, as you would for coatings.

Bathroom Flooring Tips

Bathroom Flooring - How To Lay A Sub-floor

Prior to adapt to any type of bathroom floor, which is essential to ensure that the subfloor is properly prepared to ensure that you are ready to speak. This is especially crucial in the bathrooms, where high levels of moisture in the air can make a story more susceptible to injury. How should I prepare the sub-floor depends on the fact that the bathroom floor is wood or concrete.

Because it is rigid, concrete is a good basis for the land. If you have a new rule, which can take several months for the concrete to dry completely before a new implant can be placed on it? With the old floor will have to make sure you have a flat surface, is to fill the holes or the application of a shave. Start with a hammer and chisel to remove lumps of concrete that protrude from the surface, as they may damage the new floor. Use Malta-leveling or filling holes or depressions significant. Make sure no dirt left of bitumen from a previous story, as this can stop the self-leveling to resolve properly.

Once this is done, sweeping the loose debris and dust and apply a solution of one part PVA PVA 1-5 parts water. Then, following the instructions, mix a bit 'in a bucket self-leveling compound to desired consistency. Pour this immediately to the rule and use a trowel to spread it on the floor. Should be dried overnight to produce a flat surface. Once dry, smooth the edges with sandpaper.

With a wooden floor, which is able to influence the type of flooring that would be better to use? It also depends on what kind of soil you are working on how to prepare your sub-floor. For example, if you're laying vinyl or laminate flooring, particle board sub-floor should be sufficient. However, to put the tiles, you must establish new sub-soil strata. Bare boards are needed more work.

Before you begin, make sure that all tables are securely in place, if not, screw. With screws instead of the nails means that it is easier to access on the ground in case of need in the future. Be careful not to screw down through the pipes or cables. A good way to level uneven tables staple or nail is 4 ft x 2 ft sheets of hardboard on the floor.

On bathroom floor for cutting wood to size, use a knife and a ruler to mark the surface, and then snap apart. The use of paper models for cutting wood to fit around bit difficult, as the base of a pedestal sink. Cut the desired shape with a jigsaw, before slotting the plywood in place.

How To Fit A Bathroom Mirror

A well placed mirror is a must in any bathroom, both in terms of governance and reflects light in the room to help create a sense of space. There are different versions of bathroom mirror which can be incorporated into the presentation of the bathroom, such as vanity mirrors, heated mirrors, those that can be pasted or hung on the wall tiles or mirror.

If your mirror has holes, it is necessary to use screws to hang the mirror on the wall. These are the kinds of special screws that secure the caps interest on them, to obtain an order of finish. Caps may be flat or rounded, and can be locked or screwed into place, depending on the design chosen. Mirror screws vary in design. Some have rubber rings to go into the hole to prevent the screws to damage or break the ice when they are tight.

To fix a mirror on the wall, you should use a strong adhesive and a splint to support the mirror while drying. Cut a strip of the same width of your mirror, place the level on the wall where the bottom of your mirror go and fix the wall. Use of a sealant gun, apply adhesive on the back of the mirror and move it to its position on the wall, with the lower edge on the upper part of the slat. Once you have enough time to dry adhesive, you can remove the stick and fill the holes with putty before decorating.

Mirror tiles are another option to consider in the bathroom. With a pencil, draw a line on the wall where the bottom edge of the tiles will go. Use a spirit level to that. Then draw a vertical line to make sure the first column of tiles is level. Stick the stickers on the corners of your tiles, then to the wall, using the pencil lines to guide you.

If you decide to opt for a heated bathroom mirror, the installation is more complicated. Using a spirit level to mark the positions of the last two clips, to ensure that the distance between them corresponds to insertion points on the back of the mirror. Attach the clips in place. Then, again with a spirit level and measuring tape, mark the positions of the first two clips and screw them in place. While they can slide up and down, the best clips will be a hole of oval shape, while the lower will have circular holes for the fixing screws. Once the electrician has done the electrical work necessary to mount the lower edge of the mirror in the clips below and push the wall plate, then slide the clips on the insertion points on the back of the mirror.

How To Fit A Heated Towel Rail

In Your Bathroom

Modern radiator is increasingly popular as an alternative to the traditional radiator, because not only heat the bathroom, but to provide a room specially designed for drying towels. Bath towels can be heated by electricity or water, depending on the type of heating system in your home.

If you want to install your towel with water heated in the same place you have never had a radiator, power lines will be fine, and so it should be a simple switch. However, if your plans to renovate a bathroom will involve you in finding a new place, you need to redirect pipes, which is more work.

If you want to install an electrically heated towel rail to your bathroom, you should get a qualified electrician to do to make sure it is safe and complies with building regulations.

Many bathroom radiators are covered by a protective plastic. It’s better to let the installation process to avoid scratches. To begin, remove the plastic plugs at each end of the guide, along with calipers. By contrast, a screw cap in one of the top corners and screw vent valve ventilation or another. Make sure your child is properly inserted before using a wrench to tighten the cap and valve. It 'a good idea to attach the tape around the jaws of the key to stop the removal of the cap or valve.

Then screw the valve completely, then use a spirit level to mark a horizontal line on the wall to the height you want your towel. Then attach the mounting brackets in the corresponding position on the wall. Be sure to use appropriate fasteners for the type of wall (solid or stud). And the first two bands, there will be at least one spindle. If there is only one substance, must be the center of the runway, slightly above the lower edge.

Put groups of fixed sections in brackets and mount the media guide before using the following parts of the support groups for attachment of the guide firmly in place. For an accurate finish, cover support brackets with caps pliers. Then it must be concluded by connecting the valves for the supply of tubes. The best way is to pass the pipes under the floor once the cloth has been established. It’s much more difficult to try to position the pipe prior to installation of the rail.

Bathroom Remodeling

Renovating a bathroom requires hard work, skills and time. Some jobs are best left to professionals, but certain activities, such as the establishment of a panel or bathroom tiles on the walls, should be within the capabilities of a competent DIY enthusiast. If you feel the task of completing a part of your work bathroom remodeling yourself, it is important to be clear on how best to go with each job. Take time to plan exactly what you need to do, and make sure you have the tools and materials before starting.

Here are some guidelines on how to do various tasks involved in remodeling the bathroom. We will add new items as time permits. You can also visit the "Ask the Plumber", which aims to answer some frequently asked questions our visitors have their bathrooms.

Bathroom Remodeling - Plumbing Considerations
When planning your bathroom renovation, plumbing these considerations must be taken into consideration.

Bathroom Tiles
Tile is a skill, but with practice and care is entirely possible "DIY" - save money and gives you the satisfaction of knowing that it is entirely your own DIY.

Bathroom Tiling Tips
Suggestions on how to tile the bathroom.


How To Fit A Bath Panel
Mounting a bathroom can make a huge difference to the look of your bathroom and can really finish the renovation of the bathroom.

How To Fit A Heated Towel Rail
Modern radiators are becoming increasingly popular as an alternative to traditional radiator, because it not only heat the bathroom, but to provide a place specially designed for drying towels.

How To Fit A Bathroom Mirror
A well placed mirror is a must in any bathroom, both in terms of governance and reflect light in the room to help create a sense of space.

Bathroom Flooring - How To Lay A Sub-floor
Tips on how to prepare a subfloor prior to installing new bathroom floors.

Bathroom Flooring – How To Lay Hard Tiles
Ceramic floor tiles are very popular in the toilet because they are durable and look stylish and elegant.

How To Fit Tongue & Groove Paneling To A Bathroom Wall
Assembly Language and groove panels on the wall is a nice touch that can give your bathroom a completely new, and it's a great idea if you want to give your bathroom a look without changing the main equipment.

Bathroom Lighting Ideas
Lighting Tips bathroom, to help create the right atmosphere.

How To Half-Tile A Bathroom
Here, we describe how to tile on the lower half of the plaster walls and the top half.

How To Install Bathroom Ventilation
If a window is not enough to ventilate your bathroom enough, it can install a ventilation system.

Bathroom Tiles

Bathroom Tiles – Basic Tiling Tips

Tile the walls of the bathroom from floor to ceiling is a good way to provide a surface waterproof and durable. The only part that may be susceptible to moisture damage is the seal between the joints and sealant, but this can be avoided by maintaining the room ventilated. The obvious disadvantages tile all the walls, which are expensive and take long and awkward shapes to be cut to fit around all fixtures and fittings. For those who are new tile, tiling to half of the walls is a simpler option, as tile around the tub and sink, which is where most water damage would occur.

As you methodically and carefully, tiling can be done successfully by most DIY enthusiasts. As with many household tasks, planning is essential. Bathroom tiles can be difficult due to the number of tools and equipment that you need a solution, which will involve cutting the tiles correctly. A basic rule is to always start at the bottom and work your way up, with the tiles below the top bracket. Do not trust their sockets to be flush. Instead, a good tip is to use a spirit level to ensure a wood strip to the wall for the first row of tiles and ensure that the following lines at the same level.

It may be helpful to get a gauge sheet to help you plan your design tiles for tiles are essential to health, and help you decide on the best starting points for each section. To do so, a cut length of the strip to a length of 4 or 5 shingles. Align the tiles along the edge of the strip, the use of spacers between them to achieve the hollow sorted. With a pencil, mark where the tiles meet on the ledge. You can then use to measure the walls, where the pieces should be cut to help develop better points of departure. Try to develop a plan to avoid unnecessary cutting of tiles, and above all avoid having to cut very thin pieces of tiles, as these are very difficult to cut accurately.

The application of Tiles
To begin tiling, screw or nail a strip to wall point, with a spirit level to ensure that their level. You can also attach a vertical strip, and if it would be easier for you. Using a spatula, apply the tile adhesive to the area where the first row of tiles will go. The first tile press firmly in place by aligning the edges of the slats. Place the second time in place and connect a pair of separators in combination. If the inserted at right angles can be easily removed prior to grouting.

Continue to develop methodically rows, one row at a time. Finally, remove the memory of the bottom and cut tiles to fit into the remaining space, and paste them in. In some walls, especially in older homes, the walls cannot be completely flat, which can cause the tiles to excel or sink back from the level of the surrounding tables. In this case, remove the tile before the adhesive and the amount of adhesive adjust accordingly. This may take longer, but worth it for a more orderly fashion. Tile can be a dirty job, so you have a damp sponge in hand and try to clean the excess glue on the fly - it's much easier to remove the adhesive before it hardens.

Cutting tiles
To understand where to cut a tile, and measure the space and transfer these measurements to the tile, or holding it up to space and has a mark where it needs to be cut. Place the card in the court to which the mark is aligned with the cutting wheel. Lightly press down, press the wheel to make a tile line. Push the wheel at the edge of the tile and apply firm pressure down to engage the work piece along the marked line.

Cutters are ideal for straight edges, but the curves you need to use a tile saw, which may take some time "to do it accurately. If you have to cut a section from the edge of a tile to fit around a pipe for example use a saw to cut tiles in the tile on each side of the section being removed. Then use tile nibblers to remove the section.

For thicker tiles such as tiles, it may be necessary to use an electric tile cutter. These are cheaper than in the past that many DIY and buy your own for use in all processes of mentoring, as an electric mower makes cutting the tiles faster. Most electric cutters have a water tank to cool the cutting wheel. Make sure this is filled to the required level before you start. So feed your card into the cutting wheel as you would a manual tile cutter to cut a straight edge. Some electrical machines cutting tiles have also the possibility of creating inner cutting for rounded corners.

Grouting
You will have to leave their cards at night to allow the adhesive to dry before grouting. Grout is essential to ensure we have an impervious surface. Mix the grout according to manufacturer's instructions, or use a sticker in one of stucco and tile, if you prefer. Remember that a small amount goes a long way! Using a spatula, push caulks all joints, moving in all directions to ensure that the joints are sufficiently filled. Use a damp sponge to remove excess before it dries. This can be a difficult job to ensure that they are able to rinse the sponge, as needed. Finally, to obtain a fine finish, run a trainer or a similar tool along the mortar joints.

Sealing
The purpose is to create a mosaic of impervious surface. If there are spaces between the tiles and accessories such as a bathroom or sink, use a sealant gun to apply silicone sealant to fill the joint. To avoid confusion and to get an order finished, tape along each edge of the joint is filled, you can delete after you apply the sealer. Read the instructions on the sealant to control how long to let it dry before using the toilet or sink.

Bathroom Tiling Tips

Bathroom Tiles - Bathroom Tiling Tips

Bathroom tiles are available in a wide range of colors and designs, and have the advantage of being not only decorative, but very durable - if your bathroom and tiles, the tiles should last for many years to come. The tiles are ideal for decorating a bathroom because, in contrast to painting, are resistant to mold, so that any splashing water or condensation will not hurt them. They are also easy to clean and often have a glossy finish to the bathroom always seems better.

The bathroom tiles can be used on the floor and walls, even if you are tiling the bathroom floor is important to ensure that appropriate uses tiles are strong enough to withstand the weight. It may also be necessary to shorten the door a little 'to ensure it can open and close again.

Mosaic is a skill, but with practice and attention is entirely possible to "do it yourself" - saving money and give you the satisfaction of knowing that is all his own handiwork. Allow at least 2 days - the weekend, for example - as the glue needs time to dry before grouting. Before starting work you will need to purchase cards of course. Before the choice of tiles, measure the area to cover and how many boxes will have to work (the tiles are square boxes generally 1m). Get 10% more than necessary to enjoy the spare parts to cover any breakage and cut to fill the gaps. Remember, the larger the tile, the faster the job!

As with any home decor business, preparation is the key. Make sure the surface is horizontal as possible, dry and free of dust or debris Flaxy. While using the appropriate adhesive tile is possible in most types of surfaces, including the existing tiles, metal and wood. If you're in painted tiles, scrape the surface lightly with sandpaper for membership. Tape around the edges of the bathtub, sink, etc, to protect it from scratches.

Remember, the walls of most homes are not quite square, and then, instead of starting from one corner to the tiles, use a pencil to draw a vertical line to the exact center of the wall and then to work outside this line towards the corners. Use a cutter to cut tiles to fill the gaps at each end. Skip the inconvenience by removing the fixtures and fittings such as sinks, light switches, etc back to enable tiles. It is much easier to do this than to try to reduce the burden of annoying parts!

Alternatively, if this sounds like too much work for you, could give a makeover tile. You will need to be thoroughly cleaned with white spirit and the first with an appropriate primer before painting with water-based paint is not shiny. Many home improvement stores also sell special bathroom paint tiles that can be used without a primer.

Bathroom Remodeling - Plumbing Considerations

Bathroom Remodeling

Plumbing Considerations

Feel free to discuss their plans to remodeling bathroom a qualified installer to verify that their ideas are feasible. For example, systems for hot and cold water and drains may need to be changed or updated. Or, you may need to upgrade the water tank or boiler. If you're thinking about changing the location of your bathroom or toilet, you must consider the practical aspects, for example, where the vent pipe over the ground.

The main tasks of bathroom remodeling are best left to professionals, in particular by changing the layout of a bathroom. However, an expert fan of DIY should be able to replace a bathroom with competence. Replacing the tub and sink can be done without causing too much turbulence, although without going into the bathroom while being replaced may be more uncomfortable! It is necessary to ensure the trap new cabinet is the same as above, and the tank must also be the same, unless you make the necessary changes in the supply of cold water.

To install an additional drive and replace the existing suite, a shower or a bidet, you must connect to the water source and drains. This requires some skill, and may be better left to a plumber. The slopes of drainage should be minimized and must have the supports. You must also adapt to a trap for the shower and plug the drain pipe.

Note that if you have an old system of hydraulic pipes are likely to be in imperial measurements. It helps if you check this before buying all the materials and begin work as it can be frustrating and time consuming to find once you've begun! If you have old pipes, you can use reducers and connectors to meet your needs.

On your bathroom remodeling, before you replacing an old toilet, make sure you have the right accessories and the right of health before turning off the water supply. Then flush the toilet to empty the tank. If you have a tank that is separated from the toilet bowl, it must disconnect the water supply pipe and exhaust pipe before removing it from the wall and its replacement by the new tank. The toilet can be removed once the tank is disconnected by unscrewing from the ground and lift the drain plug. Fitting a new toilet bowl is the inverse of this process. You can have a special drain plug, if the old man did not match the new bowl. Remember to make sure that all connections are tight. Put in a coupling system again follows the same principles, except that the toilet is connected to the tank.